1310 and 1550nm SLED light source
1310 and 1550nm SLED Broadband Light Source  
Application:  
Features:  
Optical fiber sensing  
High output power  
High stability  
Broadband spectrum output  
Optical fiber passive component spectrum testing  
Optical fiber grating, filter testing  
Optical fiber measurement equipments  
Specifications:  
Parameters  
1310 and 1550 SLED  
Central wavelength (nm)  
1310±10 and1550±10,etc  
-3dB spectrum width (nm)  
Output power (mW)  
≥50, etc  
1, 5, 10, 20, 30,etc  
Ripple (dB)  
≤0.2  
±0.01 dB/15 min  
Output power short -term stability1  
Output power long- term stability2  
Operating mode  
±0.03 dB/8 hour  
CW  
Fiber pigtail  
Single mode SMF-28  
FC/PC, FC/UPC or FC/APC,etc  
0 ~ 40  
Output connector  
Operating temperature()  
Storage temperature()  
Power supply  
-20 ~ 70  
110/220V AC±10%, 50Hz, 20W  
90×70×19(Module), or 320×220×90(Desk-top)  
Dimensions (L×W×H, mm)  
Remark: Stability is tested at room temperature 25±2after pre-heating 30 minutes.  
1. Test condition: fixed temperature, CW.  
2. Test condition: temperature variation ±2, CW.  
mar  
k
et@acfiber.com  
Typical spectrum:  
2mW Output Power Spectrum  
10mW Output Power Spectrum  
Order informations:  
OS-  
SLED  
Power  
Adjustable  
Operating  
Wavelength  
Connect  
Type  
Display  
Fiber Type  
Power  
or  
1=1mw  
10=10mw  
20=20mw  
50=50mw  
etc  
1310=1310nm  
1480=1480nm  
1550=1550nm  
etc  
S=SM Fiber  
P=PM Fiber  
M=MM Fiber  
FC/UPC  
FC/APC  
Etc  
M=Module  
0=Without  
1=With  
0=Without  
1=With  
D=Desk-top  
Note: LCD display is to display wavelength and output power.  
mar et@acfiber.com  
k
            market@acfiber.com